SilicONE Adhesive Spray Directions

Preparing surfaces

Appliance surface:
Make sure appliance is clean, dry and free of debris.

Skin surface:
Thoroughly clean skin with either alcohol or Westmore Effects PrimeONE Adhesive Prep (for maximum adhesion). Allow to dry completely.

Applying adhesive

  1. Spray a thin layer of adhesive to the appliance.
  2. Spray a thin layer of adhesive to the skin, being careful of overspray.
  3. Attach appliance with gentle pressure.

Using thinner

SilicONE Adhesive Spray is specially formulated to not require thinner, giving you more room in your kit for other Westmore Effects products!

REMOVING APPLIANCE

Using Westmore Effects SilicONE Adhesive Remover work around the edge of the appliance advancing slowly until adhesive begins to soften and edge lifts. Continue working until appliance is completely free.

Residual adhesive may be removed with a sponge or towel and additional remover.

 

WARNINGS:

  • For external use only.
  • DO NOT get in eyes.
  • If irritation occurs discontinue use.
  • Heavy inhalation of vapors may cause drowsiness.
  • Heavy Inhalation of vapors could irritate nose and throat.
  • Keep tightly sealed when not in use.
  • Keep out of reach of children.
  • Store below 80°F (27°C)

FLAMMABLE: Keep away from fire or flame!

 
GHS_flammable